Vive Wireless fixture controls allow you to easily enable any fixture with wireless communication and sensing.
With multiple sensor options, you can easily add wireless communication, with or without sensing, into any fixture.
Start small and grow
The scalable capabilities of Vive Wireless allows you to start of project with one room or space, and expand at any time without requiring redesign or manufacturer start-up.
Reduce Risk
Simple, intuitive programing allows flexible programming, minimizing risk during the project life cycle. With wireless communication at each fixture, the electrical contractor or facility team can easily modify zoning and sensing options for an individual fixture or group/area of fixtures with a few clicks from any mobile device.
Trusted Reliability
From the brand you trust, Lutron Clear Connect wireless communication operates at 434 MHz to deliver superior communication between system components, and patented XCT sensing technology detects even fine motion to ensure that your lights won’t leave your clients in the dark.
Controls
Creating a Vive enabled fixture is easy with integrated occupancy and daylight sensor options. The Vive Integral Fixture Control is the simplest way to achieve individual fixture control.
Install the Vive Wireless Fixture Control directly into a fixture or on a junction box nearest the fixture. Install the sensor on the ceiling near the fixture to optimize coverage in the desired area.
Specifying Lutron wireless controls is as easy as 1-2-3
Select the brand, the dimming level and the control method you need for your application and add it to your specification to ensure that what you get on the job is what you expect. Find fixtures that are available with Lutron dimming technologies.
Vive Integral Fixture Control
The fixture controller with occupancy/daylight sensor and RF-only fixture controller mount directly to a fixture. The sensor measures light in the space (daylighting) while detecting people moving within an area to determine passive infrared occupancy. The sensor controls the lights to balance light level in the space, combining convenience, exceptional energy savings, and ease of installation. Both the fixture controller with occupancy/daylight sensor and RF-only fixture controller contain two terminals that connect to either a DALI driver or to the digital bus interface.
Features
Select either Clear Connect (RF) only or Clear Connect (RF) & XCT Sensing
Vive Wireless Fixture Control
How it Works
Install the fixture control directly to a fixture or on a junction box nearest to the fixture. Install the sensor on the ceiling near the fixture to optimize coverage in the desired area.
One PowPak Wireless Fixture Control for each fixture in the space
- Controls 1A of lead or up to three drivers/ballasts/per fixture
- Select either area sensing or individual fixture sensing
- PowPak fixture sensor Combined occupancy/daylight sensor
Note: Avoid mounting the fixture sensor in direct sunlight or in the light which is cast from the fixture.